What to Review in Your 2027 Print Fleet Plan

A 2027 print fleet review should answer one question for every device you run: keep it, move it, replace it or remove it. To answer that properly you need five things on one sheet: a full inventory, at least six months of page counts, an all-in cost per page, the security status of each networked device, and a view of what will change in your business next year. For UAE companies, one of those changes is already scheduled. Mandatory e-invoicing starts on 1 January 2027 for businesses with revenue of AED 50 million or more and on 1 July 2027 for everyone else.

That change will move invoice handling off paper in finance teams across the country.

This guide walks through each part of the review in the order that saves you rework, with the checks that tend to change the decision.


Start with an inventory that includes the printers nobody listed

Most fleet lists come from the lease schedule or the service contract, so they miss everything bought outside it: the desktop inkjet in the CEO’s office, the label printer in the warehouse, the spare device in a branch, the printer a manager bought during a busy month. Those are often the most expensive pages you print, because they run on retail cartridges and nobody tracks them.

Three ways to find them:

  1. Check purchase records for toner and ink. If someone is ordering cartridges for a model that isn’t on your list, that printer exists.
  2. Scan the network for devices answering on print ports, and compare the result with your list.
  3. Walk every floor and storeroom. Unplugged devices in storage still carry stored data and, sometimes, a running lease.

For each device, record the fields below. The right-hand column is why each one matters later in the review.

Record this Why you need it
Make, model, serial number Support status, parts availability and the manufacturer’s recommended monthly volume
Location and the team it serves Placement and walking-distance decisions
Install date and total page count Age and wear, for replace-or-repair decisions
Lease, rental or purchase terms, with end dates Which decisions you can act on in 2027 without penalty
Monthly mono and colour pages Utilisation and cost per page
Networked or USB Security review scope
Consumable part numbers Supply standardisation
Service tickets in the last 12 months Reliability

Read at least six months of page counts, split by mono and colour

One month of meter readings is misleading. Month-end closing, school terms, tender submissions and audit season all create spikes, and Ramadan or summer can create dips. Pull at least six months, ideally twelve, from the device’s own web page, your print management software or your service provider’s meter reports.

Then compare each device’s average monthly volume with the manufacturer’s recommended monthly print volume. Use that figure, not the maximum duty cycle. The duty cycle is the most a device can physically survive in a peak month. The recommended volume is what it is designed to run every month.

Here is how the comparison reads in practice, using a hypothetical five-device floor:

Device Avg pages/month Recommended volume What it tells you
A3 colour MFP, finance 14,500 10,000 Overloaded. Expect queues and more breakdowns; upsize or split the load
A3 colour MFP, sales 6,200 10,000 Comfortable. Keep
A4 mono printer, HR 450 3,000 Underused, but HR may need it for confidentiality. Consider secure release on a shared MFP instead
A4 colour printer, meeting room 180 2,500 Retire candidate
Desktop inkjet, CEO office 300 n/a Unmanaged and costly per page. Retire if a shared device with secure release is close by

Illustrative figures only. Use your own meter data and the specification sheet for each model.

While you have the data open, also note colour share by team. Colour pages cost more than mono pages on the same device, because of the extra toner and wear, so a team printing 60% colour for internal reports is a policy question, not a hardware one.


Work out an all-in cost per page for every device

The lease payment is the easiest number to find and the least useful on its own. The figure that lets you compare devices fairly is cost per page, calculated as:

(lease or depreciation + service contract + consumables + paper + electricity + support time) ÷ pages printed

Fixed costs are what make low-volume devices expensive. As a simple illustration, if a printer’s fixed monthly costs add up to AED 600 and it prints 400 pages, each page carries AED 1.50 of fixed cost before any toner. The same AED 600 spread over 8,000 pages on a shared MFP is under AED 0.08 a page. That gap is usually what pays for consolidation.

If you’re comparing models or offers, our printer total cost of ownership guide walks through the full calculation step by step.

Before renewing any agreement, put the contract terms next to the meter data. If volumes have fallen since signing, you may be paying for a page allowance, a device size or a service level you no longer use.


Plan for UAE e-invoicing before you size finance-team devices

If your fleet plan predates the confirmed e-invoicing timeline, check that it accounts for it. The Ministry of Finance’s Electronic Invoicing Guidelines (V2.0, 26 October 2026) say that traditional commercial invoices, “pdf or paper format”, must be replaced by electronic invoices issued in XML and exchanged through an Accredited Service Provider (ASP). The schedule is:

Who Appoint an ASP by E-invoicing mandatory from
Businesses with annual revenue of AED 50 million or more 31 October 2026 1 January 2027
Businesses with annual revenue below AED 50 million 31 March 2027 1 July 2027
Government entities 31 March 2027 1 October 2027

Source: UAE Ministry of Finance, Electronic Invoicing Guidelines V2.0, section 8.

If you’re in the first group, the ASP appointment deadline has already passed and go-live is weeks away, so finance-floor device decisions should already reflect it.

The scope covers business-to-business and business-to-government transactions. Supplies to private individuals are excluded, so retail receipts and consumer invoices are not affected.

What this means for your fleet:

  • Don’t sign a multi-year agreement for a high-volume finance-floor device based on 2026 invoice printing. Outgoing invoices, invoice copies for filing and printed packs for approval will shrink once the system is live.
  • Keep scanning capacity. Finance teams will still receive paper: delivery notes, receipts from suppliers outside the scope, signed documents. A reliable scan-to-folder or scan-to-workflow setup matters more after the switch, not less.
  • Time contract decisions to your go-live date. If you’re in the July 2027 group, a short extension on finance devices now may be better value than a new long-term agreement.

Walk the floors to check placement

A printer can be the right model in the wrong place. When the nearest shared device is two corridors away or always has a queue, people request a desktop printer or buy one, and you’re back to unmanaged devices.

Spend an hour walking the office with the volume sheet in hand and check:

  • Can most users reach a shared device without leaving their floor or zone?
  • Do queues form at month-end or before meetings?
  • Are printed pages sitting uncollected in output trays? In HR, finance, legal and clinical areas that is a confidentiality problem as well as waste.
  • Is there space for paper stock, open trays and a technician to work?
  • Is the device near the team that prints most, rather than the team that sits nearest the power socket?

For confidential output, you have two options: put the device in a controlled room, or enable secure release, where the job is held until the user authenticates at the device with a card or PIN. Secure release usually lets you remove a department’s private printer without anyone feeling exposed.


Check security on every networked device

Printers store and process documents, sit on your network and run firmware, so they need the same care as laptops. Our photocopier and printer security tips cover the device settings in more detail. Quocirca’s Print Security Landscape 2026 (published 28 July 2026, a survey of organisations in the UK, France, Germany and the US) found:

  • 67% had experienced at least one print-related data loss in the past year, up from 56% in 2025, and 43% reported multiple incidents.
  • The average print-related breach cost just over £1 million.
  • 64% now run mixed-brand fleets, which the study links to more management complexity and higher rates of data loss.
  • Organisations with mature print security still saw losses (56%), but fewer than the least prepared group (73%).

The survey doesn’t cover the UAE, but the risks are the same here. Federal Decree-Law No. 45 of 2021 on the Protection of Personal Data sets out, as the UAE Government portal puts it, the obligations of companies that hold personal data “to secure it and maintain its confidentiality and privacy”. Printed payslips, staff passport copies and customer records contain personal data whatever format they are in.

Use this as the minimum check per device:

Check How to verify it
Default admin password changed Try the factory default on the device’s web page. If it works, it hasn’t been changed
Firmware current and still supported Compare the installed version with the manufacturer’s latest release for that model
Unused services and protocols switched off Review the network settings page: FTP, Telnet, older SNMP versions and open web ports you don’t use
User authentication and secure release Send a test job. It should wait until you sign in at the device
Hard-drive encryption and overwrite turned on Many current MFPs include both, but they are not always enabled by default
Logs kept Confirm that job and admin logs exist and someone can retrieve them

Retiring devices safely

Retirement needs a step of its own. A copier leaving your office may still hold scanned and copied documents on its internal storage. NIST’s Guidelines for Media Sanitization, SP 800-88 Rev. 2 (September 2025) treat this as part of an organisation’s media sanitisation programme: decide the method by data sensitivity, then verify and record the result. In practice, ask for written confirmation of the wipe or destruction for every device that leaves your premises, including devices returned at the end of a lease.


Change the defaults before you remove any devices

Changing settings is usually the cheapest saving available, and it needs no new hardware. Set these on every shared device and in the driver defaults pushed to users’ PCs:

  • Double-sided printing on by default.
  • Black and white by default, with colour available to the roles that genuinely need it (marketing, design, client proposals).
  • Secure release for anything sent to shared devices in confidential areas. Unreleased jobs are deleted automatically after a set time, which also cuts the pages printed and never collected.
  • Sleep timers set to the shortest delay users will accept.

Take a 40-page internal report. Printed single-sided in colour it is 40 sheets and 40 metered colour pages. With the new defaults it is 20 sheets and mono toner only, and the person printing it did nothing differently.

Tell people before the defaults change: what is changing, why, how to choose colour or single-sided when they need it, and who to ask for an exception. A one-page note does more than a policy document nobody opens.

The same settings are also your main sustainability measures. Add cartridge returns through the manufacturer’s or your supplier’s recycling programme, and track paper use by department each quarter.


Decide which devices to repair and which to replace

Ask your service provider or IT team for the last 12 months of tickets per device. Repeated faults on one machine cost more than the repair invoices: there is the time staff lose waiting, re-sending jobs and walking to another floor.

Signal Points towards
Same fault recurring after repairs Replace
Parts or consumables getting hard to source Replace before support ends
Total page count close to the model’s rated life Replace
Volume now far above the recommended monthly figure Upsize or split the load
Occasional, unrelated faults on a mid-life device Repair and keep
Lease ending in 2027 Re-tender with current volumes, not the original ones

Write down your support expectations at the same time: who staff contact when a device jams or goes offline, which devices are business-critical and need priority, and how much spare toner is kept for each standard model. Standardising on fewer models makes that stock easier to manage.


Match the fleet to what changes in 2027

Last year’s usage tells you where the fleet stands. It doesn’t tell you where the business is going. Go through the coming year with the department heads and note anything that changes printing or scanning:

If your business is… The fleet plan should consider
Moving, opening or closing an office A planned deployment with network and power ready, not a rushed purchase
Reducing floor space or moving to more hybrid work Fewer, better-placed devices with secure release and mobile printing
Hiring into high-document teams (operations, legal, customer service) Extra scanning and print capacity where they will sit
Moving approvals, contracts or onboarding to digital tools Lower print volume in those teams, more scanning at first
Going live with e-invoicing in January or July 2027 Lower finance print volume, and contract timing around the go-live date
Facing new audit or compliance requirements Authentication, logging and documented disposal

Leave room for change. Avoid long agreements for capacity you’re not sure you’ll need, but don’t undersize teams whose work stops when the printer does.


Turn the review into a 2027 plan with owners and dates

A review that ends as a spreadsheet changes nothing. Give each action an owner and a date. A simple shape for the year:

When What to do
December 2026 to January 2027 Finish the inventory, pull six to twelve months of meter data, list every contract end date
February 2027 Cost per page by device; draft the keep, move, replace or retire list; run the security checks
March 2027 Change defaults, communicate them, start a pilot on one floor before removing anything
April to June 2027 Act on contracts ending mid-year; if you’re in the July e-invoicing group, settle finance-floor devices now
Every quarter Review volume, colour share, service tickets and contract fit; check firmware status
October to November 2027 Review the year’s results and start the 2028 plan

When you consolidate, pilot first. Install or move the replacement device, set its defaults, show people how to use secure release, and only then take the old device away. A week or two of overlap costs little and keeps people from losing confidence in the change.


Frequently asked questions

How often should we review our print fleet?

Do a full review once a year, ideally three to six months before your largest contracts renew. Check volumes, colour share, service tickets and firmware status every quarter, so problems show up before the annual review rather than at it.

How do I know if a printer is underused or overloaded?

Compare its average monthly page count over six to twelve months with the manufacturer’s recommended monthly print volume for that model. A device running far below that figure is a candidate for consolidation. One running consistently above it will queue, wear faster and break down more often, so it needs a larger model or a second device to share the load.

Does UAE e-invoicing mean we need fewer printers?

It means your finance team will print fewer invoices. The Ministry of Finance guidelines replace PDF and paper commercial invoices with XML e-invoices exchanged through Accredited Service Providers, from 1 January 2027 for businesses with revenue of AED 50 million or more and from 1 July 2027 for the rest. Other paper, such as delivery notes, signed documents and invoices from suppliers outside the scope, will still arrive, so keep good scanning capacity and size print capacity on post-go-live volumes.

What should happen to a copier’s hard drive when the device is retired?

It should be wiped or destroyed by a method suited to the sensitivity of the data, and you should receive written confirmation for each device. NIST SP 800-88 Rev. 2 is a widely used reference for choosing and verifying the method. This applies to leased devices going back to the supplier as well as devices you own.


Want a second opinion on your numbers?

If you’d like help reading your meter data or planning which devices to keep, move or replace, the EPIC Solutions team can go through it with you. Call +971 50 846 2399 or see our copier sales and support page.

For a free consultation contact us at https://wa.me/971569981942 or call us at +971 56 998 1942